The new D888 Digital Recording Studio goes where no digital recorder has gone before. Its intuitive, real-time design assures immediate results. At home, the D888 provides an intuitive mixer layout that allows your sound modules and instruments to stay connected to the mixer inputs so you can start recording whenever the mood strikes you without having to change any connections.

D888 Specification:

• Recorder Section:

  • Number of Tracks: 64 + master track* (including virtual tracks) 8 track simultaneous recording/playback *Saved as stereo WAV files, number of tracks depends on capacity of the hard drive.
  • Recording Format: 44.1 kHz, 16-bit uncompressed
  • Recording Time: Max. 124 hours (based on 40 GB hard disk drive, maximum single recording time is six hours)
  • Number of Songs: Max. 200 songs
  • Mark Points: 100 points per a song
  • USB Function: Supports USB 2.0 The whole internal hard drive is available to mount to your computer as a FAT32 USB external drive
  • Track Edit Functions: Copy (over-write) Erase Swap Assign wav file to track
  • Song Edit Functions: Copy Delete Rename Protect Save Now

  Metronome Function:

  • Tempo range: 40 ~ 240 BPM 0, 2, 3, 4, 6, 8 beats

  Mixer Section:

  • Structure: 8 channel inputs (8 busses) Monitor x 1 Master x 1 Send to internal effect x 1
  • Signal Processing: 40-bit, 44.1 kHz EQ: HIGH (Fc: 10 kHz, G ± 15 dB), MID (Fc: 2.5 kHz, G ± 15 dB), LOW (Fc: 100 Hz, G ± 15 dB)
  • Effect Section: Structure: Master x 1
  • Signal Processing: 40-bit, 44.1 kHz
  • Number of Programs: 11

  General:

  • Display: 160 x 104 dots LCD with backlight
  • Power Supply: AC Current
  • Consumption: 32 W
  • Dimensions: 14.74” (W) x 13.03” (D) x 4.33” (H) 375 (W) x 331 (D) x 110 (H) mm
  • Weight: 9.70 lbs. / 4.4 kg

  Principal Specifications:

  • Frequency Response: 10 Hz ~ 20 kHz +1 dB/ -2 dB @ +4 dBu, 10 k? load
  • S/N: 96 dB (typical) @ IHF-A
  • THD+N: 0.03 % (typical) 20 Hz ~ 20kHz @ +16 dBu, 10 k? load
  • A/D Conversion: 24-bit, 64 times over-sampling
  • D/A Conversion: 24-bit, 128 times over-sampling
  • Recording/Playback bit rate: 16-bit

  Analog / Digital Input and Output Specifications:

  When output assign is INDIVIDUAL INPUT 1-8:

  • Connectors: XLR-3-31 type (+48 V phantom power, SW), 1/4” TRS phone jacks (balanced)
  • Input Impedance: 4 k? (XLR-3-31), 10 k? (1/4” TRS phone)
  • Nominal Level: -60 dBu ~ +4 dBu @ TRIM=max. ~ min.
  • Maximum Level: -48 dBu ~ +16 dBu @ TRIM=max. ~ min.
  • Source Impedance: 600 ?

  MONITOR OUTPUT L/R [CH1, 2]:

  • Connectors: 1/4” phone jacks (unbalanced)
  • Output Impedance: 500 Ohm Nominal Level: -10 dB
  • Maximum Level: +2 dBu
  • Load Impedance: greater than 10 k?

  MASTER OUTPUT L/R [CH3, 4]:

  • Connectors: 1/4” phone jacks (unbalanced)
  • Output Impedance: 500 Ohm
  • Nominal Level: -10 dBu Maximum Level: +2 dBu
  • Load Impedance: greater than 10 kOhm

  CH5-8 [CH5-8]:

  • Connectors: 1/4” phone jacks (unbalanced)
  • Output Impedance: 500 Ohm
  • Nominal Level: -10 dBu
  • Maximum Level: +2 dBu
  • Load Impedance: greater than 10 kOhm

  PHONES:

  • Connectors: two 1/4” stereo phone jacks
  • Output Impedance: 100 Ohm
  • Maximum Level: 50 mW + 50 mW @ 32 Ohm

  S/P DIF OUTPUT:

  • Connector: optical
  • Format: 24-bit S/P DIF (IEC60958)

  USB:

  • Connector: type B
  • Format: USB2.0 High-Speed Device, USB mass-storage class

  Supported OS: Windows Me/2000 or later, Mac OS 9.0.4 or later (If you wish to use the D888 with a PC running Windows 98, please contact your local Korg distributor.)

  FOOT SW: Connector: 1/4” phone jack (use separately sold PS-1)

  Included Items: AC cord

  Options: PS-1 Pedal Switch

  MIDI Function:

  • MTC transmission: frame rate 30fps, format 30NDF